| Customization: | Available |
|---|---|
| Certification: | CE, ISO9001 |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. It has ultra long arm and large coverage area.
2. The standard segment section is wide. Rigidity is good. Complete machine is stable and swings slightly when craning.
3. The standard segment principal branch is big.
4. The electrical system uses domestic high quality or importing parts. Its performance is stable and reliable.
5. The standard segment, drawbar, top-bottom turntable and other major components is welded by CO2 which penetrates deeply and deforms smally.
6. The slewing mechanism adopts winding motor which starts smoothly and reliably and places conveniently and efficiently.
7. Hoisting mechanism with good performance in speeding, lifting and declining smoothly.
Advantages:
1.reduce the dismounting requirements, lower weight, low mounting height, dismount each mast at a time in the air, save the labor cost, safety and fast.
2. it is suitable for crossover work of the cranes, without the tower cap and pull rod, the safety will be increased when there need the crossover work.
3. It is suitable for the special requirement about the height, such as airport nearby, tunnel, workshop ,and the construction site with high-tension cable.
4. It is suitable for the construction site that has the requirement about the crane boom, it can be used as internal climbing crane in the high-rise buildings, irregular roof or small areas.
5. It is very convenient for dismounting in the restricted construction site, dismount each crane boom at a time by manual.
6.The steel structure of crane boom has long using life and high safety standard.
7. The crane boom is good applicability, high-usage,the design of the topless tower crane boom is easy for realizing the serialization and standardization. Reduce the design and making cost.
8. Low design cost, short cycle, can much better satisfy the multiple demands of the customers.
Parameter:
| Standard Model | 6018 | |
| Max. Lift Load | 10t | |
| Tip Load | 1.8t | |
| Free Standing Height | 47.6m | |
| Max. Anchorage Height | 152m | |
| Jib Length | 60m | |
| Mast size | 1.6×1.6×2.5m | |
| Lift Mechanism | Lifting Speed | (a=2)5.4/27/45/67.5/90 m/min (a=4)2.7/13.5/22.5/33.75/45m/min |
| Lift motor | 45kw | |
| Wire rope diameter | 16mm | |
| Trolley Mechanism | Trolley speed | 0-65 m/min |
| Trolley Motor | 5.5kw | |
| Slewing Mechanism | Slewing speed | 0-0.665r/min |
| Slew Motor | 95N.m*2units | |
| Jacking Mechanism | Jack climbing speed | 0.4m/min |
| Jack climbing motor | 7.5kw | |
| Power | 380V/50Hz/3P | |
| Luxury Operate Cabin, Schneider Electric Parts | ||
What we can supply:
| Model | Standard model | Jib length (m) |
Free standing height(m) | Max.load (t) |
Max.Tip load(t) | Mast section size(m) | Container Quantity(40HC) |
| QTZ50 | 5010 | 50 | 30 | 4.0 | 1.0 | 1.6x1.6x2.5 Material: ∠160×160×14 |
4(7mast+1) |
| QTZ80 | 5610 | 56 | 40 | 6.0 | 1.0 | 1.6x1.6x2.5 Material: 135×135×12square tube |
6(6mast+1) |
| QTZ80 | 5510 | 55 | 41.5 | 6.0 | 1.0 | 1.68×1.68×2.99 Material:L160X16/Q345B |
7(12mast+1) |
| QTZ80 | 6010 | 60 | 41.6 | 8.0 | 1.0 | 1.68×1.68×2.99 Material:L160X16/Q345B |
7(12mast+1) |
| QTZ125 | 6018 | 60 | 47.6 | 10 | 1.8 | 1.68×1.68×2.99 Material:L180X18/Q345B |
7(12mast+1) |
| QTZ125 | 6515 | 65 | 60.8 | 10 | 1.5 | 2.0×2.0×2.99 Material: L180X18/Q345B |
7(12mast+1) |
Our service:
1.We can design the customerized tower crane as per your requirement.
2.The most suitable model will be recommended to you once we know about your requirement.
3.Shipment can be arranged from our port to your destination port.
4.Opetion video can be sent to you if needed.
5.Maintenance video will be given once the tower crane break down to help you repair.
Company profile:
Our company mainly focuses on design, manufacture, installation, maintenance, repair,sales, import and export. Our main products areTowerCrane, Construction Hoist, Overhead Crane, Gantry Crane, Jib Crane, Crane Hook, Lift platform and Crane Spare Parts.
We have exported to may countries such as Bangladesh, Vietnam, Thailand, Malaysia, Australia, Kazakhstan, Congo, Ethiopia, Peru, Brazil, Egypt and Iceland and so on.
We would like to satisfy your different kinds of requirement for the Cranes by our First Class Quality with our Excellent Service.
Welcome to visit us!
After-sale service(installation service):
Please feel free to contact with us!
Name:Tom Jia
){kind=link}